PT Inotek Pratama · (021) 452-52-87 · admin@inotekpratama.com · WhatsApp (+62) 821-1396-3063
Dehumidifier Type
D-1500
STANDING FLOOR DESICCANT ROTOR DEHUMIDIFIER
Dehumidifier Type D-1500 has a capacity of 10 kg/hour at 20ºC and 60% RH with an air flow of 1500 CMH.
01 Specifications
Specifications for D-1500
- Type
- D-1500
- Power Supply
- 3*230V/400V/50Hz
- Maximum Power
- 14.70 kW
- Heater Current
- 50/25 A
- Product Dimension
- 845 X 620 X 1180 mm
- Net Weight
- 115 KG
- Air Flow
- 1500 Cmh
- Desiccant Rotor
- Proflute
02 Troubleshooting
Common problems and how to handle them
If your problem is not listed here, contact our after-sales team.
The unit does not function
- Check that the fuse in the plug is ok.
- Check the plug is inserted in mains and mains power is on.
- Is tank full light on? Check water tank and empty if necessary.
- Check if the float of the water tank is blocked by foreign material. Is the float of water tank correctly positioned?
- Is the unit standing upright and level?
Abnormal noises from the motor
- Check and clean the air filter
- Is the unit standing upright and on a level surface?
The unit leaks water
- Has the unit been tipped?
- Check if the float of the water tank is blocked by foreign material.
Changes in temperature at the air outlet
- Is the unit on “Standby” or “Normal” operation status?
- The internal heater of the appliance will be switched on/off automatically.
After the unit has been switched off, the fan motor is still running
- After the unit stops, about two minutes are needed to cool down the electric heater by running the internal fan.
The water tank was not properly inserted into the unit
- Make sure to insert the water tank in its right position.
- Is the float of the water tank correctly positioned?
03 Related Units
Other types in Standing Floor Desiccant Rotor
Ask about D-1500 availability
Tell us the room size and its humidity conditions.